Ok thank you finally so the rest can understand and make what i make (if they have the right resources) but i was think of putting the chips on e bay....lol....for profit...but no.....ok but down to bussiness what should we do for the fang regallia?
and jay stop being such a critic if you have nothing to contribute then just leave you just dead weight and if all you do is talk about our work and you do nothing then just leave because your just another hypocrit....and we do not have the time for that....so eaither show us what your so smart brain can do or just leave..

________________

yeah fang king obviously knows what he is doing and ur critisism (however you spell it -.-) not many people gree with. make suggestions rather then telling people that they are wrong. If you think he is so wrong then come up with an altenative answer and if u dont hav one just drop it.

Yes I know that thats why the pressure of you foot aginst the skate controls the speed which you move...I skate also Im a aggressive skater and thank you for pointing out the speed skaters point of view and i would like to say we fixed taht problem

________________

Ok. Since you apparently have these plans, explain to me what you intend to do for the following requirements. A good answer will have an explanation on WHY it works and WHY it is feasible, and is not based on materials/technology that don't exist today.

1) In-wheel motor: capable of 50mph to speed, 4 inch diameter max, able to easily go in reverse

2) battery: fits inside the skate, range of at least 15 miles

3) flame regalia: makes fire without liquid fuel, does not increase the size of the skate by more than 15%, does not damage the skate or skater

4) rumble regalia: fits an active turbine and air compressor into the skate, capable of knocking over an average teenager when it expels air

I use to be a trick skater but i was also a near semi-pro biker but i messed up a trick that i found isnt possible so i cant do that anymore..but yea not many people could actually use them but us few that a extremly experienced would have fun but i think our fatalty(?) rate would be horrible lol...so worth it and couldnt a high grade titanium alloy be good for the framing cause once the metal is set it is pretty much weightless and indestuctable

1. Like ive said earilyier a simple microchip that has a function of a motor also has pressure sencors that can detect how hard you kick on the skate. Also the way the wheel moves is almost the same as the motor guy... using two electromagnets that start making the wheels move foward and when ever you kick on you foot the battery increses the power of the electromagnets and of course increses the speed of the skates.

2. same as demonstrated on the anime. a battery that goes bettween your heel and toes of the skates. also covered in titanium alloy so the battery will not get broken from grinds. the batter has 80 kilowatts stored in it. much like a battery. im working on how to charge it but im thinking about using a power cord or just charging it with you own kentic energy or maybe a combination of both.

3. no liquid fuel. the properties work almost the same as a match. phosphorus is on the wheels red with a mixture of 1% white so it will do not harm to the skater. or anyone else. The shell in which the acctual wheel goes from the skate has the same friction surface just like on the side of a match box. so when you put pressure on the wheel and you cause friction it will create a flame and of course will leave phosphorus on the ground which means a flame trail. also when you jump the pressure is already on the wheel so when you jump the friction lights the wheel and flames come out when your about to launch and when your about to jump so when you jump the flames will follow. of course im trying to find the way to stop the flame or im thinking of just making a set of wheel only for the regallia so the effect can last one ride but you always have extra wheels ( im open to any idea concerning this matter)

4. This regallia is quite tricky works the same as the one in the anime but some restrictions. 1. the regallia can only work when your going at high speeds all you have to do once you hit the 80 mph mark you will have to almost exactly do it as the fang break and do an 180 degree turn then when you foot is in the air stomp on the ground to release the air of course it pushes far away and sending you backward but still balanced (depends also on the rider) and send the other backwards, but it doesnt send the person meters in the air more like 10-20 ft depends on the weight and how fast you were moving. also when your going foward all you need to do is hit the 80 mph mark and jump up stomp the ground and you get like a turbo boost.

and about the reverse. there is none on the anime no one on the show ever uses reverse, to go backward you do an 180 and hit the break and move your weight foward or you will slip and fall. then all you have to do is kick off to keep going agian...

And Jay if you have anymore questions feel free to ask





Yo lighting you called lol but one of my cuzins got me into it im already started with the ats a long time ago if you look at my recent posts and most of your debates made it possible thank you this is a really later repost but i forgot to tell you about it...

Last edited by lambchopsil at 11:44 pm, Mar 11 2009

________________

i dont know if anyone has thought of this but i heard fangking mention a micro chip i think we would be able to put in a small ECU which could be very easily be programmed.

hope the GRAMMER is good enough for you jay3205

Ok.

1) That sounds very doable.

2) I don't think a battery exists currently that can fit in the skate and actually output that kind of power. Even if they did, you would need extra considerations to control the heat, not overload the chip, etc.

3) Sounds OK. You're going to melt your wheels though, as polyurethane (wheel material) melts at a low temperature. Also, your wheels will become unusable as more phosphor rubs off, since it won't fit on the axis anymore.

4) I don't see how this would work. The skate won't be able to compress enough air to give the results you're talking about. If your average rifle recoil doesn't send you back 10-20ft, I doubt a skate will.

Also, the riding backwards idea came from the first team Kogarasamaru faced, where the girl rides backwards so they won't attack her. I guess it's obvious, but this would take more than $800 to complete.

Ok.

2. then do you any other suggestions like decresesing the batterys power?....maybe we can do that and just have it charged on a plug...

3. i Know but we can change the wheel material with light weight but strong metal that wont put extra weight and wont break that easily... but i know after a period of time it wont be useable thats y i plan to make wheels made only for the regallia...and i dont think people are going to use the regallias for every battle or ride....

i know but i was think about the inside has a chamber that lets air goes in but compressed air is already stored then when ever you want to release it you stomp on the ground...

yes, now i remember the cyber tigers battle.....hmmm i wonder if we can put the electromagnets as bearings....what im saying is having two small electromagnets on one wheel. the front wheel making it go backward and the back wheel makes it go foward.....

________________

To be honest, I really don't have any recommendations to make a cartoon-like AT. My recommendation would be to carry around a backpack that contains a rather large set of lithium batteries. 1000 watts should be enough, at least for a prototype.

theres a problem with that....you need wires...

________________

How is having wires a problem?

because if you fall you pretty much screwed and the wires might get caught up in the wheels or might even cut off or come off depending on what the rider is doing and if were doing a parts war then when they get beat up the wires are going to get pulled out...second the rider is going to have irritation due to the wires are everywhere dont forget to menton the back pack is going to weigh us down decresing our speed mobility and air time....plus if you fall from a high altitude the extra weight might break the skates.

Ive thought of it all before...

________________

^^ I've pointed out many times that such a small battery with that kind of power doesn't exist now. If it does, then point it out. Otherwise, you'll need to redesign your plans to include an external battery. Wires wouldn't be an issue, as they can easily be managed to avoid tangling, and the "irritation" shouldn't be any worse than wearing headphone wires. Also, the vast majority of skaters won't get more than 1-3 seconds of air time... this is reality, not Air Gear.

Making an AT is much more complex than "Super powerful small motor + ultra tiny high power battery." If you can't point out/create the motor or battery, then the design won't work...

so as far ive read, lithuim ion batteries are the most powerful and longest lasting. there small enough to fit in the skate. also, the wheel will probably not be able to be made of the standard plastic like material, maybe something with plastic on the outside for traction, and inside a metal hollow shell. the engine could be a magnet motor in a smaller size. there would be weight sensor stents going out to the outside of the wheel. the boots could have a metal frame and the rest of the boot would be polymer